345,00€ (+ 21% VAT)
Complete Stand Alone Engine Control
The Infinity ECU combines with the Plug & Play harness to replace the factory ECU. It controls all of the engine functions and the Plug & Play wiring harness adapter eliminates the need for cutting and splicing wires.
Valid for Infinity 506 and 508
Plug & Play Harness with Expansion Port
AEM’s sealed, weatherproof Plug & Play harness (sold separately) includes a Lambda connector, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a High Performance DTM-Style 12P connector for adding common aftermarket sensors. Visit the “Features” tab for more information about the Honda S2000 Plug & Play harness expansion port.
The Infinity ECU for manual transmission equipped 2000-05 Honda S2000 racing engines (Infinity 506 PN 30-7106 and Infinity 508 PN 30-7108) includes an engine-specific start-up calibration and connects to the engine via a Plug & Play harness that is sold separately (PN 30-3508). Begin by determining which Infinity ECU will best support the ancillary components in your manual transmission B/D/H Series OBDII engine using the Infinity Specifications Chart in the “Specs” tab.
Infinity Pin
|
Infinity 506 Function
|
Infinity 508 Function
|
30-3508 PnP Honda Pin
|
Notes
|
---|---|---|---|---|
C1-3
|
Lowside6
|
Injector7
|
A1
|
OEM Coolant Gauge on Infinity 506 or Injector7 on Infinity 508
|
C1-4
|
Lowside7
|
Injector8
|
A18
|
MIL on Infinity 506 or Injector8 on Infinity 508
|
C1-31
|
Digital6
|
Coil7
|
Aux 6
|
Available Digital6 on Infinity 506; Coil7 not used on Infinity 508.
** Must de-pin for use with Infinity 508, Coil7 not used** |
C1-32
|
Digital7
|
Coil8
|
A32
|
Brake Switch input on Infinity 506; Coil8 not used on Infinity 508.
** Must de-pin for use with Infinity 508, Coil8 not used** |
The primary difference between the 30-7106 Infinity 506 and 30-7108 Infinity 508 is that the 508 lacks Peak & Hold injector drivers to run low impedance fuel injectors. High impedance (saturated, high-z) fuel injectors must be used with the Infinity 508.
The Infinity 506 and Infinity 508 share a common pinout with the exception of four pins where the Infinity 508 has two each additional fuel injector and ignition coil drivers. Due to the additional fuel injector and ignition coil drivers, the 508 has two fewer digital inputs and lowside outputs. Use of this harness with an Infinity 508 will require slight modification and will result in loss of some plug and play function- OEM Coolant Gauge, Malfunction Indicator Light, and Brake Switch input.
PNP | S2000 Harness, Infinity 506, Infinity 508 |
---|